好像不应该用root执行,我用一般用户执行后:
jack@jack-ChengMing-3967:~$ ~/uengine-launch/run_daemon.sh
pathis:
"" can not find qm files ("zh_CN.qm", "zh.qm")
Attribute Qt::AA_EnableHighDpiScaling must be set before QCoreApplication is created.
The name org.fcitx.Fcitx was not provided by any .service files
TimedatePropertiesChanged signal connected successfully to slot
UBoxQt TimedatePropertiesChanged signal connected successfully to slot
#############ActionInvoked signal connected successfully to slot
#############ActionInvoked signal connected successfully to slot
begin Sat Jan 14 16:42:59 2023
UBoxGetSensorList(pid 3323 tid 3323) sensor list length: 0
sensor list length:
end Sat Jan 14 16:42:59 2023
UBoxGetSensorList(pid 3323 tid 3323) sensor list length: 0
scale: 1.000000
create config "/home/jack/.config/deepin/uengine/config.conf"
QObject::moveToThread: Cannot move objects with a parent
AdapterAdded signal connect success
AdapterRemoved signal connect success
AdapterPropertiesChanged signal connect success
QLayout: Attempting to add QLayout "" to basicSettings "", which already has a layout
QLayout: Attempting to add QLayout "" to serviceSettings "", which already has a layout
start runnable check...
session_user_id:1000
curr_user_id:1000
Check OK
[ 2023-01-14 08:42:59] [session_manager.cpp:312@operator()] uengine-check-runnable.sh : 0
渲染器未选择: 默认使用主机渲染
display: 1600, 900
[ 2023-01-14 08:42:59] [platform.cpp:215@create_ime_socket] unlink failed!
emulator: WARNING: FeatureControlImpl.cpp:198: Failed to load advanced feature default setting:<unknown-launcher-dir>/lib/advancedFeaturesCanary.ini
FrameBuffer::initialize
createDisplay
setDisplayPose
call eglInitialize
egl: 1 4
gles version: 3 1
Async readback supported
glGetTexImage not found
glPushAttrib not found
glPushClientAttrib not found
glPopAttrib not found
glPopClientAttrib not found
glAlphaFunc not found
glBegin not found
glClientActiveTexture not found
glClipPlane not found
glColor4d not found
glColor4f not found
glColor4fv not found
glColor4ub not found
glColor4ubv not found
glColorPointer not found
glDisableClientState not found
glEnableClientState not found
glEnd not found
glFogf not found
glFogfv not found
glFrustum not found
glGetClipPlane not found
glGetDoublev not found
glGetLightfv not found
glGetMaterialfv not found
glGetTexEnvfv not found
glGetTexEnviv not found
glLightf not found
glLightfv not found
glLightModelf not found
glLightModelfv not found
glLoadIdentity not found
glLoadMatrixf not found
glLogicOp not found
glMaterialf not found
glMaterialfv not found
glMultiTexCoord2fv not found
glMultiTexCoord2sv not found
glMultiTexCoord3fv not found
glMultiTexCoord3sv not found
glMultiTexCoord4f not found
glMultiTexCoord4fv not found
glMultiTexCoord4sv not found
glMultMatrixf not found
glNormal3f not found
glNormal3fv not found
glNormal3sv not found
glOrtho not found
glPointParameterf not found
glPointParameterfv not found
glPointSize not found
glRotatef not found
glScalef not found
glTexEnvf not found
glTexEnvfv not found
glMatrixMode not found
glNormalPointer not found
glPopMatrix not found
glPushMatrix not found
glShadeModel not found
glTexCoordPointer not found
glTexEnvi not found
glTexEnviv not found
glTranslatef not found
glVertexPointer not found
glClipPlanef not found
glFrustumf not found
glGetClipPlanef not found
glOrthof not found
glAlphaFuncx not found
glClearColorx not found
glClearDepthx not found
glColor4x not found
glDepthRangex not found
glFogx not found
glFogxv not found
glFrustumx not found
glClipPlanex not found
glGetFixedv not found
glGetLightxv not found
glGetMaterialxv not found
glGetTexEnvxv not found
glGetTexParameterxv not found
glLightModelx not found
glLightModelxv not found
glLightx not found
glLightxv not found
glLineWidthx not found
glLoadMatrixx not found
glMaterialx not found
glMaterialxv not found
glMultMatrixx not found
glMultiTexCoord4x not found
glNormal3x not found
glOrthox not found
glPointParameterx not found
glPointParameterxv not found
glPointSizex not found
glPolygonOffsetx not found
glRotatex not found
glSampleCoveragex not found
glScalex not found
glTexEnvx not found
glTexEnvxv not found
glTexParameterx not found
glTexParameterxv not found
glTranslatex not found
glGetClipPlanex not found
attempting to create egl context
attempting to create egl pbuffer context
context creation successful
attempting to make context current
context-current successful
host system has enough extensions
There are sufficient EGLconfigs available
XXX Vendor Google (Intel)
GL Vendor Google (Intel)
GL Renderer Android Emulator OpenGL ES Translator (Mesa Intel(R) HD Graphics 530 (SKL GT2))
GL Extensions OpenGL ES 3.0 (OpenGL ES 3.2 Mesa 22.0.5)
basic EGL initialization successful
program: 6 true
[MSG] /home/zll/src/uengine-rel/hw_anbox/ubox-base/simplenet.cpp:63 SimpleServer::Start /run/user/1000/anbox/sockets/uengine_pipe starting...
[WRN] /home/zll/src/uengine-rel/hw_anbox/ubox-base/simplenet.cpp:68 unlink(mSocketFile.c_str()) result(-1) errno(2) 没有那个文件或目录
sys.prop.writeimei=861356966403560
sys.prop.writeimsi=460001285274948
sys.prop.writesimserial=89860066289666403560
qt.qpa.xcb: QXcbConnection: XCB error: 5 (BadAtom), sequence: 390, resource id: 0, major code: 20 (GetProperty), minor code: 0
[MSG] /home/zll/src/uengine-rel/hw_anbox/ubox-audio/main.cpp:27 start audio player... 2
[MSG] /home/zll/src/uengine-rel/hw_anbox/ubox-base/simplenet.cpp:63 SimpleServer::Start /run/user/1000/anbox/sockets/anbox_audio starting...
[WRN] /home/zll/src/uengine-rel/hw_anbox/ubox-base/simplenet.cpp:68 unlink(mSocketFile.c_str()) result(-1) errno(2) 没有那个文件或目录
[DBG] /home/zll/src/uengine-rel/hw_anbox/ubox-base/simplenet.cpp:96 client: 51
[MSG] /home/zll/src/uengine-rel/hw_anbox/ubox-base/simplenet.cpp:14 /run/user/1000/anbox/sockets/uengine_pipe connection open 51
cannot add library /usr/bin/lib64/vulkan/libvulkan.so: failed
cannot add library <unknown-launcher-dir>/lib64/vulkan/libvulkan.so: failed
cannot add library <unknown-launcher-dir>/lib64/vulkan/libvulkan.so.1: failed
[DBG] /home/zll/src/uengine-rel/hw_anbox/ubox-base/simplenet.cpp:96 client: 56
[MSG] /home/zll/src/uengine-rel/hw_anbox/ubox-base/simplenet.cpp:14 /run/user/1000/anbox/sockets/uengine_pipe connection open 56
defaultRegisterTriggerWait 0x7f2e9e2743e0
[DBG] /home/zll/src/uengine-rel/hw_anbox/ubox-base/simplenet.cpp:96 client: 57
[MSG] /home/zll/src/uengine-rel/hw_anbox/ubox-base/simplenet.cpp:14 /run/user/1000/anbox/sockets/uengine_pipe connection open 57
[DBG] /home/zll/src/uengine-rel/hw_anbox/ubox-base/simplenet.cpp:96 client: 58
[MSG] /home/zll/src/uengine-rel/hw_anbox/ubox-base/simplenet.cpp:14 /run/user/1000/anbox/sockets/uengine_pipe connection open 58
socket(58) recv(1) eof errno(0)
[MSG] /home/zll/src/uengine-rel/hw_anbox/ubox-base/simplenet.cpp:29 /run/user/1000/anbox/sockets/uengine_pipe connection close 58
[DBG] /home/zll/src/uengine-rel/hw_anbox/ubox-base/simplenet.cpp:96 client: 59
[MSG] /home/zll/src/uengine-rel/hw_anbox/ubox-base/simplenet.cpp:14 /run/user/1000/anbox/sockets/uengine_pipe connection open 59
UBoxAddSensorConnection .....0x7f2e8f8dc940 (0)
UBoxAddSensorConnection add 0x7f2e8f8dc940
UBoxAddSensorConnection succeeded added total count=1 (0x7f2e8f8dc940)
UBoxRemoveSensorConnection .....remove id = 3 (1)
UBoxRemoveSensorConnection succeeded removed total count=0 (id = 3)
UBoxAddSensorConnection .....0x7f2e8d8d8940 (0)
UBoxAddSensorConnection add 0x7f2e8d8d8940
UBoxAddSensorConnection succeeded added total count=1 (0x7f2e8d8d8940)
UBoxRemoveSensorConnection .....remove id = 4 (1)
UBoxRemoveSensorConnection succeeded removed total count=0 (id = 4)
UBoxAddSensorConnection .....0x7f2e8d0d7940 (0)
UBoxAddSensorConnection add 0x7f2e8d0d7940
UBoxAddSensorConnection succeeded added total count=1 (0x7f2e8d0d7940)
UBoxRemoveSensorConnection .....remove id = 5 (1)
UBoxRemoveSensorConnection succeeded removed total count=0 (id = 5)
UBoxAddSensorConnection .....0x7f2e8f8dc940 (0)
UBoxAddSensorConnection add 0x7f2e8f8dc940
UBoxAddSensorConnection succeeded added total count=1 (0x7f2e8f8dc940)
[DBG] /home/zll/src/uengine-rel/hw_anbox/ubox-base/simplenet.cpp:96 client: 58
[MSG] /home/zll/src/uengine-rel/hw_anbox/ubox-base/simplenet.cpp:14 /run/user/1000/anbox/sockets/uengine_pipe connection open 58
[DBG] /home/zll/src/uengine-rel/hw_anbox/ubox-base/simplenet.cpp:96 client: 66
[MSG] /home/zll/src/uengine-rel/hw_anbox/ubox-base/simplenet.cpp:14 /run/user/1000/anbox/sockets/uengine_pipe connection open 66
[DBG] /home/zll/src/uengine-rel/hw_anbox/ubox-base/simplenet.cpp:96 client: 67
[MSG] /home/zll/src/uengine-rel/hw_anbox/ubox-base/simplenet.cpp:14 /run/user/1000/anbox/sockets/uengine_pipe connection open 67
[DBG] /home/zll/src/uengine-rel/hw_anbox/ubox-base/simplenet.cpp:96 client: 68
[MSG] /home/zll/src/uengine-rel/hw_anbox/ubox-base/simplenet.cpp:14 /run/user/1000/anbox/sockets/uengine_pipe connection open 68
defaultRegisterTriggerWait 0x7f2e9e2743e0
[DBG] /home/zll/src/uengine-rel/hw_anbox/ubox-base/simplenet.cpp:96 client: 69
[MSG] /home/zll/src/uengine-rel/hw_anbox/ubox-base/simplenet.cpp:14 /run/user/1000/anbox/sockets/uengine_pipe connection open 69
socket(69) recv(1) eof errno(0)
[MSG] /home/zll/src/uengine-rel/hw_anbox/ubox-base/simplenet.cpp:29 /run/user/1000/anbox/sockets/uengine_pipe connection close 69
defaultRegisterTriggerWait 0x7f2e9e2743e0
socket(68) recv(8) eof errno(62)
render read header error
[MSG] /home/zll/src/uengine-rel/hw_anbox/ubox-base/simplenet.cpp:29 /run/user/1000/anbox/sockets/uengine_pipe connection close 68
[DBG] /home/zll/src/uengine-rel/hw_anbox/ubox-base/simplenet.cpp:96 client: 70
[MSG] /home/zll/src/uengine-rel/hw_anbox/ubox-base/simplenet.cpp:14 /run/user/1000/anbox/sockets/uengine_pipe connection open 70
defaultRegisterTriggerWait 0x7f2e9e2743e0
defaultRegisterTriggerWait 0x7f2e9e2743e0
socket(58) recv(1) eof errno(0)
socket(70) recv(8) eof errno(0)
render read header error
[MSG] /home/zll/src/uengine-rel/hw_anbox/ubox-base/simplenet.cpp:29 /run/user/1000/anbox/sockets/uengine_pipe connection close 58
[MSG] /home/zll/src/uengine-rel/hw_anbox/ubox-base/simplenet.cpp:29 /run/user/1000/anbox/sockets/uengine_pipe connection close 70
slot_HideInput 596 hideIM
[DBG] /home/zll/src/uengine-rel/hw_anbox/ubox-base/simplenet.cpp:96 client: 68
[MSG] /home/zll/src/uengine-rel/hw_anbox/ubox-base/simplenet.cpp:14 /run/user/1000/anbox/sockets/uengine_pipe connection open 68
[DBG] /home/zll/src/uengine-rel/hw_anbox/ubox-base/simplenet.cpp:96 client: 58
[MSG] /home/zll/src/uengine-rel/hw_anbox/ubox-base/simplenet.cpp:14 /run/user/1000/anbox/sockets/uengine_pipe connection open 58
[DBG] /home/zll/src/uengine-rel/hw_anbox/ubox-base/simplenet.cpp:96 client: 69
[MSG] /home/zll/src/uengine-rel/hw_anbox/ubox-base/simplenet.cpp:14 /run/user/1000/anbox/sockets/uengine_pipe connection open 69
[DBG] /home/zll/src/uengine-rel/hw_anbox/ubox-base/simplenet.cpp:96 client: 70
[MSG] /home/zll/src/uengine-rel/hw_anbox/ubox-base/simplenet.cpp:14 /run/user/1000/anbox/sockets/uengine_pipe connection open 70
[DBG] /home/zll/src/uengine-rel/hw_anbox/ubox-base/simplenet.cpp:96 client: 71
[MSG] /home/zll/src/uengine-rel/hw_anbox/ubox-base/simplenet.cpp:14 /run/user/1000/anbox/sockets/uengine_pipe connection open 71
[DBG] /home/zll/src/uengine-rel/hw_anbox/ubox-base/simplenet.cpp:96 client: 72
[MSG] /home/zll/src/uengine-rel/hw_anbox/ubox-base/simplenet.cpp:14 /run/user/1000/anbox/sockets/uengine_pipe connection open 72
[DBG] /home/zll/src/uengine-rel/hw_anbox/ubox-base/simplenet.cpp:96 client: 73
[MSG] /home/zll/src/uengine-rel/hw_anbox/ubox-base/simplenet.cpp:14 /run/user/1000/anbox/sockets/uengine_pipe connection open 73
[DBG] /home/zll/src/uengine-rel/hw_anbox/ubox-base/simplenet.cpp:96 client: 74
[MSG] /home/zll/src/uengine-rel/hw_anbox/ubox-base/simplenet.cpp:14 /run/user/1000/anbox/sockets/uengine_pipe connection open 74
[DBG] /home/zll/src/uengine-rel/hw_anbox/ubox-base/simplenet.cpp:96 client: 75
[MSG] /home/zll/src/uengine-rel/hw_anbox/ubox-base/simplenet.cpp:14 /run/user/1000/anbox/sockets/uengine_pipe connection open 75
defaultRegisterTriggerWait 0x7f2e9e2743e0
[DBG] /home/zll/src/uengine-rel/hw_anbox/ubox-base/simplenet.cpp:96 client: 76
[MSG] /home/zll/src/uengine-rel/hw_anbox/ubox-base/simplenet.cpp:14 /run/user/1000/anbox/sockets/uengine_pipe connection open 76
Android successfully booted
窗口状态: 安卓(1) QT(0)
slot_HideInput 596 hideIM
socket(68) recv(1) eof errno(0)
[MSG] /home/zll/src/uengine-rel/hw_anbox/ubox-base/simplenet.cpp:29 /run/user/1000/anbox/sockets/uengine_pipe connection close 68
GetTimeZone Asia/Shanghai standardOffset = 28800 offsetFromUtc = 28800
GetTimeZone timezone = Etc/GMT-8
initTimeDate setTimezone command = /system/bin/service call alarm 3 s16 Etc/GMT-8
initDateTime Timezone /system/bin/service call alarm 3 s16 Etc/GMT-8 succeeds
-----------cur sys locale
[ 2023-01-14 08:43:03] [session_manager.cpp:979@initLocale] Get cur system locale fails.
fuse dir:/data/uengine/安卓应用文件
start fuse server
[MSG] /home/zll/src/uengine-rel/hw_anbox/ubox-base/simplenet.cpp:63 SimpleServer::Start /run/user/1000/anbox/sockets/uengine_fuse starting...
[WRN] /home/zll/src/uengine-rel/hw_anbox/ubox-base/simplenet.cpp:68 unlink(mSocketFile.c_str()) result(-1) errno(2) 没有那个文件或目录
socket(73) recv(1) eof errno(0)
[MSG] /home/zll/src/uengine-rel/hw_anbox/ubox-base/simplenet.cpp:29 /run/user/1000/anbox/sockets/uengine_pipe connection close 73
socket(74) recv(1) eof errno(0)
[MSG] /home/zll/src/uengine-rel/hw_anbox/ubox-base/simplenet.cpp:29 /run/user/1000/anbox/sockets/uengine_pipe connection close 74
createMountDirLink delete android dir Symbolic Link: "/home/jack/安卓应用文件"
createMountDirLink create link dir: "/home/jack/安卓应用文件"
socket(75) recv(1) eof errno(0)
[MSG] /home/zll/src/uengine-rel/hw_anbox/ubox-base/simplenet.cpp:29 /run/user/1000/anbox/sockets/uengine_pipe connection close 75
[DBG] /home/zll/src/uengine-rel/hw_anbox/ubox-base/simplenet.cpp:96 client: 77
[MSG] /home/zll/src/uengine-rel/hw_anbox/ubox-base/simplenet.cpp:14 /run/user/1000/anbox/sockets/uengine_pipe connection open 77
[DBG] /home/zll/src/uengine-rel/hw_anbox/ubox-base/simplenet.cpp:96 client: 73
[MSG] /home/zll/src/uengine-rel/hw_anbox/ubox-base/simplenet.cpp:14 /run/user/1000/anbox/sockets/uengine_pipe connection open 73
窗口状态: 安卓(2) QT(0)
[DBG] /home/zll/src/uengine-rel/hw_anbox/ubox-base/simplenet.cpp:96 client: 74
[MSG] /home/zll/src/uengine-rel/hw_anbox/ubox-base/simplenet.cpp:14 /run/user/1000/anbox/sockets/uengine_pipe connection open 74
defaultRegisterTriggerWait 0x7f2e9e2743e0
[DBG] /home/zll/src/uengine-rel/hw_anbox/ubox-base/simplenet.cpp:96 client: 75
[MSG] /home/zll/src/uengine-rel/hw_anbox/ubox-base/simplenet.cpp:14 /run/user/1000/anbox/sockets/uengine_pipe connection open 75
[DBG] /home/zll/src/uengine-rel/hw_anbox/ubox-base/simplenet.cpp:96 client: 82
[MSG] /home/zll/src/uengine-rel/hw_anbox/ubox-base/simplenet.cpp:14 /run/user/1000/anbox/sockets/uengine_pipe connection open 82
[DBG] /home/zll/src/uengine-rel/hw_anbox/ubox-base/simplenet.cpp:96 client: 83
[MSG] /home/zll/src/uengine-rel/hw_anbox/ubox-base/simplenet.cpp:14 /run/user/1000/anbox/sockets/uengine_pipe connection open 83
[DBG] /home/zll/src/uengine-rel/hw_anbox/ubox-base/simplenet.cpp:96 client: 84
[MSG] /home/zll/src/uengine-rel/hw_anbox/ubox-base/simplenet.cpp:14 /run/user/1000/anbox/sockets/uengine_pipe connection open 84
slot_HideInput 596 hideIM
576 operator() start install apk: "com.tencent.mm"
535 UBoxDefaultInstallApk send pkg info.
540 "com.tencent.mm" true
Open /usr/share/uengine/session_uninstall failed(没有那个文件或目录)
544 UBoxDefaultInstallApk app install end: 1