shenmo7192 我这里在ubuntu 22.04上无法正常运行使用此脚本安装的UEngine，详细报错见下（直接运行./run_daemon.sh然后打开程序菜单）：
gfdgd_xi@gfdgd-xi-MS-7B84:~/uengine-launch$ ./run_daemon.sh
pathis:
QSocketNotifier: Can only be used with threads started with QThread
"" can not find qm files ("_zh_CN.qm", "_zh.qm")
Attribute Qt::AA_EnableHighDpiScaling must be set before QCoreApplication is created.
TimedatePropertiesChanged signal connected successfully to slot
UBoxQt TimedatePropertiesChanged signal connected successfully to slot
#############ActionInvoked signal connected successfully to slot
#############ActionInvoked signal connected successfully to slot
begin Sun Jun 12 07:33:07 2022
UBoxGetSensorList(pid 4679 tid 4679) sensor list length: 0
sensor list length:
end Sun Jun 12 07:33:07 2022
UBoxGetSensorList(pid 4679 tid 4679) sensor list length: 0
scale: 1.000000
create config "/home/gfdgd_xi/.config/deepin/uengine/config.conf"
QObject::moveToThread: Cannot move objects with a parent
AdapterAdded signal connect success
AdapterRemoved signal connect success
AdapterPropertiesChanged signal connect success
QLayout: Attempting to add QLayout "" to basicSettings "", which already has a layout
QLayout: Attempting to add QLayout "" to serviceSettings "", which already has a layout
start runnable check...
session_user_id:1000
curr_user_id:1000
Check OK
[ 2022-06-11 23:33:07] [session_manager.cpp:312@operator()] uengine-check-runnable.sh : 0
渲染器未选择: 默认使用主机渲染
display: 1600, 900
emulator: WARNING: FeatureControlImpl.cpp:198: Failed to load advanced feature default setting:<unknown-launcher-dir>/lib/advancedFeaturesCanary.ini
FrameBuffer::initialize
createDisplay
setDisplayPose
call eglInitialize
egl: 1 4
gles version: 3 1
Async readback supported
glGetTexImage not found
glPushAttrib not found
glPushClientAttrib not found
glPopAttrib not found
glPopClientAttrib not found
glAlphaFunc not found
glBegin not found
glClientActiveTexture not found
glClipPlane not found
glColor4d not found
glColor4f not found
glColor4fv not found
glColor4ub not found
glColor4ubv not found
glColorPointer not found
glDisableClientState not found
glEnableClientState not found
glEnd not found
glFogf not found
glFogfv not found
glFrustum not found
glGetClipPlane not found
glGetDoublev not found
glGetLightfv not found
glGetMaterialfv not found
glGetTexEnvfv not found
glGetTexEnviv not found
glLightf not found
glLightfv not found
glLightModelf not found
glLightModelfv not found
glLoadIdentity not found
glLoadMatrixf not found
glLogicOp not found
glMaterialf not found
glMaterialfv not found
glMultiTexCoord2fv not found
glMultiTexCoord2sv not found
glMultiTexCoord3fv not found
glMultiTexCoord3sv not found
glMultiTexCoord4f not found
glMultiTexCoord4fv not found
glMultiTexCoord4sv not found
glMultMatrixf not found
glNormal3f not found
glNormal3fv not found
glNormal3sv not found
glOrtho not found
glPointParameterf not found
glPointParameterfv not found
glPointSize not found
glRotatef not found
glScalef not found
glTexEnvf not found
glTexEnvfv not found
glMatrixMode not found
glNormalPointer not found
glPopMatrix not found
glPushMatrix not found
glShadeModel not found
glTexCoordPointer not found
glTexEnvi not found
glTexEnviv not found
glTranslatef not found
glVertexPointer not found
glClipPlanef not found
glFrustumf not found
glGetClipPlanef not found
glOrthof not found
glAlphaFuncx not found
glClearColorx not found
glClearDepthx not found
glColor4x not found
glDepthRangex not found
glFogx not found
glFogxv not found
glFrustumx not found
glClipPlanex not found
glGetFixedv not found
glGetLightxv not found
glGetMaterialxv not found
glGetTexEnvxv not found
glGetTexParameterxv not found
glLightModelx not found
glLightModelxv not found
glLightx not found
glLightxv not found
glLineWidthx not found
glLoadMatrixx not found
glMaterialx not found
glMaterialxv not found
glMultMatrixx not found
glMultiTexCoord4x not found
glNormal3x not found
glOrthox not found
glPointParameterx not found
glPointParameterxv not found
glPointSizex not found
glPolygonOffsetx not found
glRotatex not found
glSampleCoveragex not found
glScalex not found
glTexEnvx not found
glTexEnvxv not found
glTexParameterx not found
glTexParameterxv not found
glTranslatex not found
glGetClipPlanex not found
attempting to create egl context
attempting to create egl pbuffer context
context creation successful
attempting to make context current
context-current successful
host system has enough extensions
There are sufficient EGLconfigs available
XXX Vendor Google (Mesa/X.org)
GL Vendor Google (Mesa/X.org)
GL Renderer Android Emulator OpenGL ES Translator (llvmpipe (LLVM 13.0.1, 256 bits))
GL Extensions OpenGL ES 3.0 (OpenGL ES 3.2 Mesa 22.0.1)
basic EGL initialization successful
program: 6 true
[MSG] /home/zll/src/uengine-rel/hw_anbox/ubox-base/simplenet.cpp:63 SimpleServer::Start /run/user/1000/anbox/sockets/uengine_pipe starting...
sys.prop.writeimei=861917279379171
sys.prop.writeimsi=460001344741693
sys.prop.writesimserial=89860077132779379171
[MSG] /home/zll/src/uengine-rel/hw_anbox/ubox-audio/main.cpp:27 start audio player... 2
[MSG] /home/zll/src/uengine-rel/hw_anbox/ubox-base/simplenet.cpp:63 SimpleServer::Start /run/user/1000/anbox/sockets/anbox_audio starting...
[DBG] /home/zll/src/uengine-rel/hw_anbox/ubox-base/simplenet.cpp:96 client: 28
[MSG] /home/zll/src/uengine-rel/hw_anbox/ubox-base/simplenet.cpp:14 /run/user/1000/anbox/sockets/uengine_pipe connection open 28
cannot add library /usr/bin/lib64/vulkan/libvulkan.so: failed
cannot add library <unknown-launcher-dir>/lib64/vulkan/libvulkan.so: failed
cannot add library <unknown-launcher-dir>/lib64/vulkan/libvulkan.so.1: failed
[DBG] /home/zll/src/uengine-rel/hw_anbox/ubox-base/simplenet.cpp:96 client: 33
[MSG] /home/zll/src/uengine-rel/hw_anbox/ubox-base/simplenet.cpp:14 /run/user/1000/anbox/sockets/uengine_pipe connection open 33
defaultRegisterTriggerWait 0x7f77f78943e0
[DBG] /home/zll/src/uengine-rel/hw_anbox/ubox-base/simplenet.cpp:96 client: 34
[MSG] /home/zll/src/uengine-rel/hw_anbox/ubox-base/simplenet.cpp:14 /run/user/1000/anbox/sockets/uengine_pipe connection open 34
[DBG] /home/zll/src/uengine-rel/hw_anbox/ubox-base/simplenet.cpp:96 client: 35
[MSG] /home/zll/src/uengine-rel/hw_anbox/ubox-base/simplenet.cpp:14 /run/user/1000/anbox/sockets/uengine_pipe connection open 35
socket(35) recv(1) eof errno(0)
[MSG] /home/zll/src/uengine-rel/hw_anbox/ubox-base/simplenet.cpp:29 /run/user/1000/anbox/sockets/uengine_pipe connection close 35
[DBG] /home/zll/src/uengine-rel/hw_anbox/ubox-base/simplenet.cpp:96 client: 36
[MSG] /home/zll/src/uengine-rel/hw_anbox/ubox-base/simplenet.cpp:14 /run/user/1000/anbox/sockets/uengine_pipe connection open 36
UBoxAddSensorConnection .....0x7f77e56c8940 (0)
UBoxAddSensorConnection add 0x7f77e56c8940
UBoxAddSensorConnection succeeded added total count=1 (0x7f77e56c8940)
UBoxRemoveSensorConnection .....remove id = 3 (1)
UBoxRemoveSensorConnection succeeded removed total count=0 (id = 3)
UBoxAddSensorConnection .....0x7f77e86ce940 (0)
UBoxAddSensorConnection add 0x7f77e86ce940
UBoxAddSensorConnection succeeded added total count=1 (0x7f77e86ce940)
UBoxRemoveSensorConnection .....remove id = 4 (1)
UBoxRemoveSensorConnection succeeded removed total count=0 (id = 4)
UBoxAddSensorConnection .....0x7f77e66ca940 (0)
UBoxAddSensorConnection add 0x7f77e66ca940
UBoxAddSensorConnection succeeded added total count=1 (0x7f77e66ca940)
UBoxRemoveSensorConnection .....remove id = 5 (1)
UBoxRemoveSensorConnection succeeded removed total count=0 (id = 5)
UBoxAddSensorConnection .....0x7f77e7ecd940 (0)
UBoxAddSensorConnection add 0x7f77e7ecd940
UBoxAddSensorConnection succeeded added total count=1 (0x7f77e7ecd940)
[DBG] /home/zll/src/uengine-rel/hw_anbox/ubox-base/simplenet.cpp:96 client: 35
[MSG] /home/zll/src/uengine-rel/hw_anbox/ubox-base/simplenet.cpp:14 /run/user/1000/anbox/sockets/uengine_pipe connection open 35
[DBG] /home/zll/src/uengine-rel/hw_anbox/ubox-base/simplenet.cpp:96 client: 43
[MSG] /home/zll/src/uengine-rel/hw_anbox/ubox-base/simplenet.cpp:14 /run/user/1000/anbox/sockets/uengine_pipe connection open 43
[DBG] /home/zll/src/uengine-rel/hw_anbox/ubox-base/simplenet.cpp:96 client: 44
[MSG] /home/zll/src/uengine-rel/hw_anbox/ubox-base/simplenet.cpp:14 /run/user/1000/anbox/sockets/uengine_pipe connection open 44
[DBG] /home/zll/src/uengine-rel/hw_anbox/ubox-base/simplenet.cpp:96 client: 45
[MSG] /home/zll/src/uengine-rel/hw_anbox/ubox-base/simplenet.cpp:14 /run/user/1000/anbox/sockets/uengine_pipe connection open 45
defaultRegisterTriggerWait 0x7f77f78943e0
[DBG] /home/zll/src/uengine-rel/hw_anbox/ubox-base/simplenet.cpp:96 client: 46
[MSG] /home/zll/src/uengine-rel/hw_anbox/ubox-base/simplenet.cpp:14 /run/user/1000/anbox/sockets/uengine_pipe connection open 46
socket(46) recv(1) eof errno(0)
[MSG] /home/zll/src/uengine-rel/hw_anbox/ubox-base/simplenet.cpp:29 /run/user/1000/anbox/sockets/uengine_pipe connection close 46
defaultRegisterTriggerWait 0x7f77f78943e0
socket(45) recv(8) eof errno(0)
render read header error
[DBG] /home/zll/src/uengine-rel/hw_anbox/ubox-base/simplenet.cpp:96 client: 47
[MSG] /home/zll/src/uengine-rel/hw_anbox/ubox-base/simplenet.cpp:29 /run/user/1000/anbox/sockets/uengine_pipe connection close 45
[MSG] /home/zll/src/uengine-rel/hw_anbox/ubox-base/simplenet.cpp:14 /run/user/1000/anbox/sockets/uengine_pipe connection open 47
defaultRegisterTriggerWait 0x7f77f78943e0
defaultRegisterTriggerWait 0x7f77f78943e0
socket(35) recv(1) eof errno(0)
[MSG] /home/zll/src/uengine-rel/hw_anbox/ubox-base/simplenet.cpp:29 /run/user/1000/anbox/sockets/uengine_pipe connection close 35
socket(47) recv(8) eof errno(0)
render read header error
[MSG] /home/zll/src/uengine-rel/hw_anbox/ubox-base/simplenet.cpp:29 /run/user/1000/anbox/sockets/uengine_pipe connection close 47
slot_HideInput 596 hideIM
[DBG] /home/zll/src/uengine-rel/hw_anbox/ubox-base/simplenet.cpp:96 client: 46
[MSG] /home/zll/src/uengine-rel/hw_anbox/ubox-base/simplenet.cpp:14 /run/user/1000/anbox/sockets/uengine_pipe connection open 46
[DBG] /home/zll/src/uengine-rel/hw_anbox/ubox-base/simplenet.cpp:96 client: 35
[MSG] /home/zll/src/uengine-rel/hw_anbox/ubox-base/simplenet.cpp:14 /run/user/1000/anbox/sockets/uengine_pipe connection open 35
[DBG] /home/zll/src/uengine-rel/hw_anbox/ubox-base/simplenet.cpp:96 client: 45
[MSG] /home/zll/src/uengine-rel/hw_anbox/ubox-base/simplenet.cpp:14 /run/user/1000/anbox/sockets/uengine_pipe connection open 45
[DBG] /home/zll/src/uengine-rel/hw_anbox/ubox-base/simplenet.cpp:96 client: 47
[MSG] /home/zll/src/uengine-rel/hw_anbox/ubox-base/simplenet.cpp:14 /run/user/1000/anbox/sockets/uengine_pipe connection open 47
[DBG] /home/zll/src/uengine-rel/hw_anbox/ubox-base/simplenet.cpp:96 client: 48
[MSG] /home/zll/src/uengine-rel/hw_anbox/ubox-base/simplenet.cpp:14 /run/user/1000/anbox/sockets/uengine_pipe connection open 48
[DBG] /home/zll/src/uengine-rel/hw_anbox/ubox-base/simplenet.cpp:96 client: 49
[MSG] /home/zll/src/uengine-rel/hw_anbox/ubox-base/simplenet.cpp:14 /run/user/1000/anbox/sockets/uengine_pipe connection open 49
defaultRegisterTriggerWait 0x7f77f78943e0
[DBG] /home/zll/src/uengine-rel/hw_anbox/ubox-base/simplenet.cpp:96 client: 50
[MSG] /home/zll/src/uengine-rel/hw_anbox/ubox-base/simplenet.cpp:14 /run/user/1000/anbox/sockets/uengine_pipe connection open 50
[DBG] /home/zll/src/uengine-rel/hw_anbox/ubox-base/simplenet.cpp:96 client: 51
[MSG] /home/zll/src/uengine-rel/hw_anbox/ubox-base/simplenet.cpp:14 /run/user/1000/anbox/sockets/uengine_pipe connection open 51
[DBG] /home/zll/src/uengine-rel/hw_anbox/ubox-base/simplenet.cpp:96 client: 52
[MSG] /home/zll/src/uengine-rel/hw_anbox/ubox-base/simplenet.cpp:14 /run/user/1000/anbox/sockets/uengine_pipe connection open 52
[DBG] /home/zll/src/uengine-rel/hw_anbox/ubox-base/simplenet.cpp:96 client: 53
[MSG] /home/zll/src/uengine-rel/hw_anbox/ubox-base/simplenet.cpp:14 /run/user/1000/anbox/sockets/uengine_pipe connection open 53
Android successfully booted
窗口状态: 安卓(1) QT(0)
slot_HideInput 596 hideIM
socket(46) recv(1) eof errno(0)
[MSG] /home/zll/src/uengine-rel/hw_anbox/ubox-base/simplenet.cpp:29 /run/user/1000/anbox/sockets/uengine_pipe connection close 46
GetTimeZone Asia/Shanghai standardOffset = 28800 offsetFromUtc = 28800
GetTimeZone timezone = Etc/GMT-8
initTimeDate setTimezone command = /system/bin/service call alarm 3 s16 Etc/GMT-8
socket(50) recv(1) eof errno(0)
[MSG] /home/zll/src/uengine-rel/hw_anbox/ubox-base/simplenet.cpp:29 /run/user/1000/anbox/sockets/uengine_pipe connection close 50
socket(51) recv(1) eof errno(0)
[MSG] /home/zll/src/uengine-rel/hw_anbox/ubox-base/simplenet.cpp:29 /run/user/1000/anbox/sockets/uengine_pipe connection close 51
initDateTime Timezone /system/bin/service call alarm 3 s16 Etc/GMT-8 succeeds
-----------cur sys locale
[ 2022-06-11 23:33:11] [session_manager.cpp:979@initLocale] Get cur system locale fails.
fuse dir:/data/uengine/安卓应用文件
start fuse server
[MSG] /home/zll/src/uengine-rel/hw_anbox/ubox-base/simplenet.cpp:63 SimpleServer::Start /run/user/1000/anbox/sockets/uengine_fuse starting...
socket(52) recv(1) eof errno(0)
[MSG] /home/zll/src/uengine-rel/hw_anbox/ubox-base/simplenet.cpp:29 /run/user/1000/anbox/sockets/uengine_pipe connection close 52
createMountDirLink delete android dir Symbolic Link： "/home/gfdgd_xi/安卓应用文件"
createMountDirLink create link dir: "/home/gfdgd_xi/安卓应用文件"
[DBG] /home/zll/src/uengine-rel/hw_anbox/ubox-base/simplenet.cpp:96 client: 54
[MSG] /home/zll/src/uengine-rel/hw_anbox/ubox-base/simplenet.cpp:14 /run/user/1000/anbox/sockets/uengine_pipe connection open 54
[DBG] /home/zll/src/uengine-rel/hw_anbox/ubox-base/simplenet.cpp:96 client: 52
[MSG] /home/zll/src/uengine-rel/hw_anbox/ubox-base/simplenet.cpp:14 /run/user/1000/anbox/sockets/uengine_pipe connection open 52
窗口状态: 安卓(2) QT(0)
[DBG] /home/zll/src/uengine-rel/hw_anbox/ubox-base/simplenet.cpp:96 client: 57
[MSG] /home/zll/src/uengine-rel/hw_anbox/ubox-base/simplenet.cpp:14 /run/user/1000/anbox/sockets/uengine_pipe connection open 57
defaultRegisterTriggerWait 0x7f77f78943e0
[DBG] /home/zll/src/uengine-rel/hw_anbox/ubox-base/simplenet.cpp:96 client: 58
[MSG] /home/zll/src/uengine-rel/hw_anbox/ubox-base/simplenet.cpp:14 /run/user/1000/anbox/sockets/uengine_pipe connection open 58
[DBG] /home/zll/src/uengine-rel/hw_anbox/ubox-base/simplenet.cpp:96 client: 59
[MSG] /home/zll/src/uengine-rel/hw_anbox/ubox-base/simplenet.cpp:14 /run/user/1000/anbox/sockets/uengine_pipe connection open 59
[DBG] /home/zll/src/uengine-rel/hw_anbox/ubox-base/simplenet.cpp:96 client: 60
[MSG] /home/zll/src/uengine-rel/hw_anbox/ubox-base/simplenet.cpp:14 /run/user/1000/anbox/sockets/uengine_pipe connection open 60
[DBG] /home/zll/src/uengine-rel/hw_anbox/ubox-base/simplenet.cpp:96 client: 61
[MSG] /home/zll/src/uengine-rel/hw_anbox/ubox-base/simplenet.cpp:14 /run/user/1000/anbox/sockets/uengine_pipe connection open 61
slot_HideInput 596 hideIM
576 operator() start install apk: "com.tencent.mm"
535 UBoxDefaultInstallApk send pkg info.
540 "com.tencent.mm" true
Open /usr/share/uengine/session_install failed(没有那个文件或目录)
Open /usr/share/uengine/session_uninstall failed(没有那个文件或目录)
安卓会通过focus来拉起
[ 2022-06-11 23:33:40] [platform.cpp:582@create_window] created: 0x558804ef8050 width: 540 height: 900
274 slot_CreateWindow "org.anbox.appmgr" "org.anbox.appmgr"
initTitlebar 226 m_allowDragSize = false , m_allowFullScreen = true
QPropertyAnimation: you're trying to animate a non-existing property Up of your QObject
[DBG] /home/zll/src/uengine-rel/hw_anbox/ubox-base/simplenet.cpp:96 client: 62
[MSG] /home/zll/src/uengine-rel/hw_anbox/ubox-base/simplenet.cpp:14 /run/user/1000/anbox/sockets/uengine_pipe connection open 62
[DBG] /home/zll/src/uengine-rel/hw_anbox/ubox-base/simplenet.cpp:96 client: 63
[MSG] /home/zll/src/uengine-rel/hw_anbox/ubox-base/simplenet.cpp:14 /run/user/1000/anbox/sockets/uengine_pipe connection open 63
X Error of failed request: BadWindow (invalid Window parameter)
Major opcode of failed request: 18 (X_ChangeProperty)
Resource id in failed request: 0x1
Serial number of failed request: 9
Current serial number in output stream: 11
[DBG] /home/zll/src/uengine-rel/hw_anbox/ubox-base/simplenet.cpp:96 client: 68
[MSG] /home/zll/src/uengine-rel/hw_anbox/ubox-base/simplenet.cpp:14 /run/user/1000/anbox/sockets/uengine_pipe connection open 68
[DBG] /home/zll/src/uengine-rel/hw_anbox/ubox-base/simplenet.cpp:96 client: 70
[MSG] /home/zll/src/uengine-rel/hw_anbox/ubox-base/simplenet.cpp:14 /run/user/1000/anbox/sockets/uengine_pipe connection open 70
